• DJI E300 Propulsion System 4 Axis Quadcopter Brushless Motors & ESC Set

DJI

DJI E300 Propulsion System 4 Axis Quadcopter Brushless Motors & ESC Set

£89.99
RRP £124.99Save £35.00

Not available in store Not available online
delivery

FREE SHIPPING,On Orders Over £399.99

See terms & conditions*
 

DETAILS:

Please note that the DJI E300 Propulsion System is no longer being produced. For the latest DJI technology, visit the pages for the E305 or E310 Propulsion Systems

The E series tuned propulsion system is the first power solution of its kind for the multirotor industry. It brings greater aerodynamic efficiency and higher thrust-weight ratio, while increasing reliability, stability and agility.

 

9.4*4.3 ” ROTOR

Representing the state of the art in this industry, the 9.4*4.3“ rotor offers an approx. 20% ~ 25% improvement over the 8.0*4.5” rotor without the need of using a heavier motor, making the 350 ~ 450 model quad copter achieve a significantly higher lift and thus more powerful to carry a camera and gimbal setup (FPV). The rotors are carefully balanced dynamically, you will never be bothered by jello effect from your airborne rolling shutter camera. The low inertial design enables your flight controller to use a much higher gain value to achieve a higher stability and maneuverability all at once.

2212 MOTOR

The industry leaders for multi-rotors, these motors have been used worldwide for years in a variety of scenarios with proven reliability.

15A ESC

This new and improved ESC along with new highly efficient and quick response algorithms, combine to provide drastic optimization of both motor and rotor parameters, all come together to enhance this propulsion system to utilize an agile thrust which gives the aircraft extra maneuverability and stability in wind and during descending. Also feature an electromagnetic compatibility design with a coaxial-cable, which work together to provide a calm electromagnetic environment for the airborne sensors.

SPECIFICATIONS:

E300 E600

SYSTEM

Recommended Load 300 g/axis 600 g/axis
Maximum Thrust 600 g/axis 1600 g/axis
Working Temperature -5 °C ~ 40 °C -5 °C ~ 40 °C
Recommended Battery 3S LiPo 6S LiPo
Units Per Package Quad or Hexa Quad or Hexa

ESC

Current 15 A OPTO 20 A OPTO
Signal Frequency 30 Hz~450 Hz 30 Hz~450 Hz
Voltage 11.1 V~14.8 V 14.8 V~25.2 V
Battery 3S~4S LiPo 4S~6S LiPo

MOTOR

Stator Size 22×12 mm 35×8 mm
KV 920 rpm/V 415 rpm/V
Weight 50 g 90 g

ROTOR

Diameter /Thread Pitch 24×11 cm    9.4×4.3 inch 31×11 cm    12×4.2 inch