• Thunder Tiger Ace RC Program Card for Brushless ESC

Thunder Tiger

Thunder Tiger Ace RC Program Card for Brushless ESC

RRP £24.99Save £2.49

- +

Available in store Available to order online

FREE SHIPPING,On Orders Over £399.99

See terms & conditions*

 Thunder Tiger Ace RC Program Card for Brushless ESC


1/8 Scale Affordable Brushless System Now Is Available!
Thunder Tiger Corp. is pleased to announce the brand new ACE RC brushless speed control and motor for 1/8 scale R/C vehicles. ESC is now available in 80A and 150A, in which the former is perfectly used for buggy and truggy while the latter is mainly used for power-on-demand monster trucks as well as 1/5 scale. The ACE RC IBL4020 2000Kv super brushless system not only provides amazing torque and speed potential for your 1/8 scale vehicle, but supplies a longer operation time due to less friction in the brushless motor compared with other sensored systems. Also ACE RC brushless speed control is compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LPP, Feigao and etc. Moreover, ESC is bullet-proof itself with other multiple protection features such as voltage cut-off protection, over-heat protection, throttle signal loss protection, motor blocked protection and splash/dust proof cover. Our customer would breeze through the system setup with the programming card.


  • Running Mode
  • Drag Brake Force
  • Low Voltage Cut-Off Threshold
  • Start Mode(Punch)
  • Max Brake Force
  • Max Reverse Force
  • Initial Brake Force
  • Neutral Range
  • Timing
  • Over-heat Protection
  • Motor Rotation
  • Lipo Cells

*Note: The option “Auto Calculate” is only available for 2s, 4s and 6s Lipo. If the voltage of the battery pack is lower than 8.8V, it is judged as a 2s Lipo; If the voltage is between 8.8V to 17.6V, it is judged as a 4s Lipo; If the voltage is higher than 17.6V, it is judged as a 6S Lipo. So in order to make the Low Voltage Cutoff Protection function always works correctly, please set the “Lipo Cells” item manually.

The program card is ONLY suitable for the ESC of BLC-80C, BLC-150C, BLC-80C Plus, BLC-150C Plus.
Please refer to the user manual of the ESC for detail information about each programmable item.