Pack of 20

Inc. all servo screws and fixings

Futaba plugs

Bulk pack of twenty

Pack of 5

Pack of 5

Open end type (not 3003) pack of 20

prevents servo gromits being crushed by servo screws. Pack of 20

Inc charge lead

Alows two servos to be pluged into the same input

Torq/Spd @ 4.8V: 44/.23
Torq/Spd @ 6.0V: 57/.19
Bearing: Oilite
Size(inches): 1.6x .8x 1.4
Weight: 1.60oz.

For charging Futaba transmitters and reciever batteries in situe.

Genuine Futaba servos are your easiest and most efficient way to upgrade your Futaba system. No other system provides you access to as many different sizes, shapes and functions as Futaba. Currently there are 28 Futaba servos available ranging from the micro, 0.34 ounce S3103 to the mighty 194 ounce/inches of torque of the S3801. The performance and reliability of our servos have made them the favorite choice of professionals including top RC competition specialists and motion picture special effect artists

Torq/Spd @ 6.0V: 0.16sec
Bearing: Oilite
Size: 40 x 20 x 39.1mm
Weight: 41g

Torq/Spd @ 4.8V: 44/.23
Torq/Spd @ 6.0V: 57/.19
Bearing: Oilite
Size(inches): 1.6X.8X1.4
Weight: 1.60oz.

Genuine Futaba servos are your easiest and most efficient way to upgrade your Futaba system. No other system provides you access to as many different sizes, shapes and functions as Futaba. Currently there are 28 Futaba servos available ranging from the micro, 0.34 ounce S3103 to the mighty 194 ounce/inches of torque of the S3801. The performance and reliability of our servos have made them the favorite choice of professionals including top RC competition specialists and motion picture special effect artists

Power Requirement:4.8V-6.0V
Current Drain:13mA
Dimensions:64.1 x 36 x 21mm
Weight:1.50 oz (41g)

Power Requirement: 4.8V-6.0V
Current Drain: 13mA
Dimensions: 2.5 x 1.375 x 0.875 in (63.5 x 35 x 22mm)
Weight: 1.75 oz (50g)

With a fantastic specification and an equally fantastic price, the new Megatech 2PL 40MHz set from Futaba is sure to be in great demand.

For those looking for a budget entry to model flying, the Single Stick SS3 system from Futaba is the way forward.

Launched to suit sport pilots needing a first computer system, the Field Force 6 has a staggering array of computing options combined with easy operation.

Power Requirement: 4.8V-6.0V
Current Drain: 13mA
Dimensions: 2.5 x 1.375 x 0.875 in (63.5 x 35 x 22mm)
Weight: 1.75 oz (50g)

Surface version 40Mhz.

Power Requirement: 4.8V-6.0V
Current Drain: 13mA
Dimensions: 2.5 x 1.375 x 0.875 in (63.5 x 35 x 22mm)
Weight: 1.75 oz (50g)

Power Requirement: 4.8V-6.0V
Current Drain: 13mA
Dimensions: (55 x 32 x 21mm)
Weight: 1.20 oz (36g)

High-powered big rigs will perform even better with the high-tech advantage of the 3PM-FM radio! Besides extraordinary control and response, the 3PM-FM boasts incredibly easy access and programming of its many functions. Get the most out of your nitro crusher - match it up with the 3PM-FM system, for computerized control at a surprisingly affordable price!

When you’re buying your first radio system, you need a simple and easy-to-use transmitter that will take you through the early stages of learning to fly.

The new 6EXAP set now includes a 100 character LCD screen, 4 character mode name, PCM and PPM operation, dual rate and exponential on aileron, elevator and rudder, upgraded mixing functions, separate throttle cut button etc, etc..

Never ones to rest on their laurels, Futaba have continued to develop their market leading 6 channel set, and now proudly announce the release of the new 6EXP transmitter, which offers both aircraft and helicopter functionality, together with the ability to operate all Futaba PPM and PCM 1024 receivers (35/40MHz systems only). New additions to the already powerful functions include a second free programmable mix and twin rate flap trim in aircraft mode, and a third swashplate mo

Surface version of the popular 6EXA intended for use with boat and robot projects.

Sure to become the most popular mid range computer radio on the market today, the new FF7 from Futaba is packed with “must have” features.

After years of development, Futaba have now produced the most advanced entry level 6 channel helicopter radio available today in the new 6EXH set.

The transmitter styling is based on the incredibly successful 6EXA radio, but the software and capabilities of this set are all new! .

The new 6EXP has been selected as Futaba’s first 2.4GHz aircraft/ helicopter system, and utilises the highly advanced FASST (Futaba Advanced Spread Spectrum Technology) system to give the ultimate in performance and control. Allowing switch on and go operation, and with amazing interference rejection, this set will become the standard by which all others are measured. (see the video)

Surface version of the FF6 and ideal for Robotwars projects and can be used with a PCM reciever.

Launched to suit sport pilots needing a first computer system, the Field Force 6 has a staggering array of computing options combined with easy operation.

Able to transmit on either PPM or PCM, this full 7 channel set also adopts the very popular “Jog Dial” programming system from its bigger brother, the FF9. This enables programme selection to be just a twist away - press to confirm selection, then twist again to adjust and confirm settings.The FF7 is so simple to programme that the manual is almost superfluous, it's the perfect system for the computer novice or those baffled by previous computer systems!However, don't be fooled by the ease of programming, t

All the functions and features of Futaba's current 35MHz Field Force 7... but now on 2.4GHz and with even more extras! Other than the short 2.4GHz aerial, it feels just like its best-selling predecessor and the characteristic large LCD, 10 model memory and easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix and govenor control.

All the functions and features of Futaba's current 35MHz Field Force 7... but now on 2.4GHz and with even more extras! Other than the short 2.4GHz aerial, it feels just like its best-selling predecessor and the characteristic large LCD, 10 model memory and easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix and govenor control.

Futaba's dominance of the computer system market is once again emphasised with the release of the new generation FF9.

The eagerly awaited Futaba 10C radio is here! Supplied on 2.4GHz - with the lastest, 21g R6014FS receiver and three digital servos - it is also capable of operating your existing compatible PPM and PCM 35MHz receivers by simply changing the module. With a full 10 channels and FASST transmission it has a large, backlit custom LCD screen and highly effective jog-dial to make navigation between menus simple.