DJI F550 Flamewheel V5 with Naza Light v1.1 GPS
Now includes the new 2312E motors & 430 light ESC`s
In line with DJI’s spirit of constant innovation, we are happy to announce new updates to theF450 & F550 ARF Kit.
In order to provide our customers with a better flying experience, these updated F450 and F550 kits will be offered at the same price as current kits.
A new propulsion system is customized and refined for the F450 and F550 series to bring greater efficiency and load capacity.
Upgraded 2312E motor
The new motor has rebuilt inner eletro-magnetic design to achieve higher efficiency. This newdesign improves heat dissipation of the motor base, while lower cogging torque helps the motor work smoother at low RPMs.
The 420LITE ESC
Adopts plastic shell with an embedded aluminum sheet to provide both protection and good heat dissipation to its inner parts. Optimized algorithms bring smarter response and greater stability than before.
Z-blade 9450 propellers
Due to well-designed aerodynamic shape and high-precision manufacturing techniques, Z-blade 9450 propellers produce powerful thrust with excellent dynamic balance performance, helping your platform easily handle greater payloads and reduce platform vibrations
FlameWheel series is multi-rotor frame designed for all pilots for fun or AP. With DJI WKM or NAZA autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.
We have a range of packages for the F550 Flamewheel from the basic kit with motors and speed controllers right through to fully working with brushless camera gimbal for the Gopro 3.
Included with the Flamewheel:
- 1x Frame set.
- 6x 20amp 420 Lite ESC Speed controllers.
- 6x 2312 960kva Motors
- 8x Z-blade 9450 propellers (cw/ccw)
- Naza Light V1.1 with GPS
Note: These products are not assembled when shipped. Users must solder and assemble before flying
Naza-M Lite Features
REQUIRED TO COMPLETE:
- 5-8 channel 2.4ghz TX/RX (one of the channels needs to be a three position switch)
- LiPo battery, 11.1v/14.4v 3350 - 6100mah 3/4s 30c. (if you are using a camera gimbal, we recommend the 6100mah)
- LiPo Charger.
If fitting a camera gimbal to the bottom you will need optional extended legs. If you purchase a gimbal with your F550 we will include the extended under carriage legs.
Model is supplied as a kit and requires building. You will need a soldering iron, solder and tiewraps. Picture shows assembled model for reference only. Can be supplied assembled on request.
Fast building service. Lead time 24-48hrs.
We can build your DJI F450 or F550 Flamewheel for you which would include all the assembly of the frames and control unit. You will still need to calibrate the flight controller your self as this is something you may have to do in the future we so feel its a skill your best learning. The two video`s in the video tab will help you build and or set up your Flamewheel if you wish to do it yourself.
Fast building service from £29.99, Lead time 2-7days depending on level of completeness.
We can build your Flamewheel for you which would include all the assembly of the frames and control unit, radio system, gimbals, FPV. Basically everything you buy along with your quadcopter frame kit.
The two build options we offer are:
Frame & Flight Controller: We will build the frame which includes all soldering and fitting of connectors (XT60), Fit the flight controller of your choice leaving you the fitting of the radio either your own or supplied by us.
Frame, Flight Controller, Radio and Accessories. So we do the same as above but also fit ther adio supplied by us and any other accessories bought along side such as gimbals, FPV Ground station etc. We fully calibrate and flight test so its ready to go.
The two video`s bellow will help you build and or set up your Flamewheel if you wish to do it yourself.
All our builds are covered by our extended email support hours up to 10.30pm