Marionville Models

Frenzy 100 ARF

The Frenzy 100 is a perfect model if you are looking to practice and perform precision or freestyle aerobatic flying thanks in part to its sleek high-sided fuselage, and carefully selected wing section with enlarged control surfaces.
Designed using the latest C.A.D techniques and constructed entirely from carefully selected balsa and light plywood, the Frenzy is covered with UltraCote® in a highly visible colour scheme with distinctive graphics making orientation in the air very easy.
A wide range of engines may be used to power the Frenzy, either a two-stroke or four-stroke glow engine or power it with an electric motor for silent aerobatic performance. In addition to the engine mounts it comes complete with all of the necessary mounting hardware to fit an electric outrunner motor should you wish to take that route.
Externally mounted servos in the rear of the fuselage ensure short slop free linkages for the rudder and elevator, and each aileron is driven by it’s own wing mounted servo, again with a short linkage for precise control.
The bolt on wing makes the Frenzy very easy to transport and the comprehensive hardware pack includes a pre-painted aluminium landing gear, finished with pre-painted fibreglass spats, a beautiful fibreglass cowl, and the pre-painted racing style pilot figure add the final touches to a stylish model.
Hangar9’s usual photo illustrated guide completes this superb package with assembly, engine mounting and radio installation taking just a few evenings work.

Balsa & light plywood construction
Aerodynamically stretched tail and large control surfaces
Aluminium landing gear
Pre-painted fibreglass engine cowl
Pre-painted fibreglass wheel spats
Bolt on wing
Removable top hatch
Mounting hardware included for electric option
Covered and trimmed in Hangar9 UltraCote®
Painted pilot figure included

Wingspan 1500mm (61 inch)
Length 1618mm (63.7 inch)
Engine 61-1.00 2-stroke
91-1.25 4-stroke
Weight 3.7-4.1kg (8 ¼ 9lb)
Radio 4-6 Channels
Wing Area: 69 sq dm (1066 sq in)
Motor Size: 60-110 Outrunner
Servos 5-6 x DS821 High Torque (SPM3702)

Recommended Engine Set-Up
Motor .61 2-stroke (EVOEO610)
.100NX 2-stroke (EVOE1100)
Spinner 2 ½ inch
Radio Spektrum DX7
Servos 6 x DS821 High Torque (SPM3702)

Recommended Electric Set-Up
Motor Power 60 Outrunner (EFLM4060A)
Power 110 Outrunner (EFLM4110A)
Speed Control 85-110Amp
Battery 8s Lipo 2x 4S 14.8v 5000mah (required)
Radio Spektrum DX7
Servos 5 x DS821 High Torque (SPM3702)