Skip To Nav

Marionville Models

Marionville RC Models. Specialist Remote Control Retailer of Cars, Boats, Planes, Helicopters and much more

Marionville Models

Items: Total:

View Cart | Checkout

New Radio Controlled Cars, Helicopters and more

  • DJI Phantom Vision + Plus GPS Quadcopter w/HD Camera

    DJI Phantom Vision + Plus GPS Quadcopter w/HD CameraThe Phantom 2 Vision+ is simple to set up and super ... 914.99 - More >

  • DJI Zenmuse H3-3D 3 Axisi Gimbal for GoPro 3, 3+

    DJI Zenmuse H3-3D 3 Axisi Gimbal for GoPro 3, 3+Zenmuse H3-3D Features 3-axis high performance gimbal Strong, lightweight Compatible ... - More >

  • DJI Phantom 2 / Vision Prop Guards

    DJI Phantom 2 / Vision Prop GuardsThe Phantom Prop Guard is designed to protect your propellers from ... 13.99 - More >

  • DJI Phantom 1 & FC40 Prop Guards

    DJI Phantom 1 & FC40 Prop GuardsThe Phantom Prop Guard is designed to protect your propellers from ... 11.99 - More >

Mini Indoor/Outdoor RC Planes

RC Shop >  RC Shop >  Planes - RC Radio Control >  Electric Powered & Gliders, RC Planes >  Mini Indoor/Outdoor RC Planes > 

Parkzone Micro J-3 Cub 2.4ghz DSM2 Electric RC Plane RTF

Parkzone Micro J-3 Cub 2.4ghz DSM2 Electric RC Plane RTF

89.99




OUT OF STOCK
More Views:
Parkzone Micro J-3 Cub 2.4ghz DSM2 Electric RC Plane RTF  Parkzone Micro J-3 Cub 2.4ghz DSM2 Electric RC Plane RTF  Parkzone Micro J-3 Cub 2.4ghz DSM2 Electric RC Plane RTF



PKZ3900i Ultra Micro J-3 Cub RTF
Parkzone continue to expand their range of scale indoor electric flyers with this delightful ready to fly Piper J3 Cub.
The all foam ready to fly one-piece model features an under cambered wing section designed to allow the model to be flown slowly and an upper wing surface with moulded in wing ribs and doped fabric effect finish for a more scale like appearance.
The engine cowling is complete with dummy Lycoming engine cylinders whilst the lower fuselage has a convenient moulded battery placement “pocket”. The model is finished in a scale Piper yellow colour scheme with black accents, registration numbers and of course the Piper Teddy Bear logo on the tail-fin.
On board the 2.4 GHz fully proportional three channel electronics controlling throttle, elevator and rudder are pre-installed with sprung carbon pushrods to the rudder and elevator. The steerable tail wheel and scale looking sprung wire landing gear comes complete with lightweight foam Cub “doughnut” wheels, enabling the model to take off and land on smooth surfaces.
This one box purchase comes complete with everything included, a 2.4Ghz transmitter, 1S 3.7volt 120 mAh Li-Po battery and Li-Po balancing charger powered by 4 AA dry batteries. With no further building or additional purchases needed this super little model can be in the air in no time at all.
Designed primarily for indoor flight and weighing in at a mere 25 grams this super model is sure to delight indoor pilots with its scale like flying characteristics and good looks and there is no doubt that this great little model could also be flown outdoors in very calm conditions when there is little or no wind.


Three-channel control (rudder/elevator/throttle) that’s perfect for intermediate pilots
Difficult to damage and easy to repair thanks to highly durable EPS foam
Lightweight at only 24 grams
Lots of power through lightweight 3.7V Li-Po battery
No worries about interference because of DSM2 radio architecture
Ready-To-Fly version includes everything needed to fly in one box, with no additional
completion necessary
Quick and safe battery charging courtesy of DC Li-Po charger

Included

Transmitter
Transmitter batteries
12v Charger
Flight battery


Wingspan 460 mm (18.2")
Length 314 mm (12.4")
Weight 24 g (.85 oz)
Receiver: PKZ 3 channel 2.4GHz DSM 2 RX/ESC unit
Battery 3.7V 120mAh LiPO
Charger DC single cell fast charger

We guarantee that our products will be of the highest quality and sourced from official UK distributers.Checkout our in store video

We pride ourselves on high levels of on-time parcel deliveries from 4.79....Read More

We are more than happy to help you. Call 0131 317 7010 or you can email us...Click Here